 |
|
 |
 |
 |
BW DIGI-METER F-2000 SERIES
 |
| The Model FH is the base unit of the BW DIGI-METER
series. The Model FH is a
paddlewheel type insertion flow sensor. It applies precise digital technology to monitor flow rates from 1.0 to 20 feet per second. The signal can travel up to one mile without a booster and, the unit will interface with many of the process meters, electronic control devices and computer systems on the market. The F-2000RT is a flow rate meter and flow totalizer. It has an eight digit, easy to read LCD display. Three front panel push buttons allow the operator to toggle between flow rate and total flow, reset the total flow to zero or, access the programming screens. Four standard AA batteries or an AC/DC plug-in wall transformer powers the unit. There are two optional, user installable, add-on circuit boards available. The Model AO converts the displayed rate to an analog 4-20 milliamp or, zero to 10 volt DC output signal. The Model PC is capable of programmable batch processing, high/low flow rate alarm functions or, controlling chemical injection proportional to flow rate. For Superior Quality, Styling and Features, Count on the DIGI-FLO Series to Deliver! Applications for BW DIGI-METER Series Meters include… The Model RT:  Measures
& Displays Rate of Flow
Measures
& Displays Total Flow
The Model AO: Measure
and Display Rate of Flow
Measure
and Display Total Flow
Control
External Devices with 4-20mA Control Signal
Control
External Devices with 0 – 10 VDC Control Signal
The Model PC: Measure
and Display Rate of Flow
Measure and Display Total Flow
Maintain
a Flow Rate Range Alarm
Trigger
a High flow Rate Alarm
Trigger
a Low Flow Rate Alarm
Manually
Controlled Batch processing
Timed
Auto Reset Batch Processing
Proportional
Flow Chemical Pump Process Control |
| BW DIGI-METER F-1000 SERIES | |||
|
|||
| Blue-White's F-1000 Series meters provide the performance
and features of electronic
meters, without the need for an electrical hook-up. Three versions of this top quality digital meter are offered: BW DIGI-METER F-1000RB Battery Powered RATE Meter BW DIGI-METER F-1000TB Battery Powered FLOW TOTALIZER BW DIGI-METER F-1000RT Battery Powered RATE Meter and FLOW TOTALIZER
|
Pipe sizes: 1"
Female pipe threads (IPS)
1-1/2"
Female pipe threads (IPS)
2"
Female pipe threads (IPS)
Fitting material 316
Stainless Steel
Maximum Fluid Temperature: 200°F
/ 93°C at 0 PSI
Maximum Working Pressure: 300
psig / 20 Bar at 70°F / 21°C
Accuracy (full scale): F-1000
= +/- 2% Full scale
F-2000
= +/- 1% Full scale
Sensor
= +/- 1% Full scale |
 |
 |
BW DIGI-METER SENSOR ONLY
Pipe sizes: 3/8" to 12"
No
Display
25 feet of signal cable
NEMA 4X rated, Outdoor use OK
Coil
sensor option
 Distance
up to 200 feet (61 meters)
Requires
no external power
AC sine
wave output signal
Coil generates
AC voltage
From .06 volts to approximately 3 volts, depending on the flow rate Hall
Effect sensor option
Distance
up to 1 mile (1.61 km)
TTL/CMOS
compatible digital (current sinking) output signal
DC square
wave output signal
Power required:
 Customer
supply power (6-24V DC absolute)
115V
AC plug in transformer
220V
AC plug in transformer
230V
AC plug in transformer |
 |
| BW DIGI-METER F-2000 Series electronic insertion
style flowmeters, are well
suited for monitoring flow in municipal water and wastewater applications. The clamp on saddle fitting and insertion sensor is quickly installed on IPS (ASTM-D-1785) pipe sizes from 1-1/2” through 12” and metric (DIN 8062) pipe sizes from 50 mm through 315 mm. The electronic display and communication enclosure can be mounted directly to the sensor, or remotely mounted to a pipe or panel. Standard F-2000 models display flow rate and accumulated total flow, and include an NPN open collector output for communication with data loggers, SCADA systems, and other external devices. Optional 4-20 mA / 0-10 VDC plug-in circuitry can be added for additional communication requirements. The optional batch processing plug-in circuitry includes an 8-amp relay board that adds manual or automatic batch processing capability, or a high/low flow rate alarm output. The electronics can be battery operated using four standard AA size batteries or, AC powered using a 15-24V DC plug-in transformer. A battery back-up option is also available. Battery life, in standard mode, is a minimum of one year. A battery saving mode is available. LCD display icons indicate the current operating mode, and warn of a low battery power condition. The memory is nonvolatile, and therefore is not affected by loss of power. The F-2000 Series is field programmable, and the programming mode is easily accessed via three front panel tactile switches. The F-2000 can be factory programmed to any required units of measure. The digital display is housed For Superior Design, Quality and Function Insist on BW DIGI-METER! |
 |
| sales@mullarkeyassoc.com |
 |
|
Alsip, IL USA 60803 PHONE: 708/597-5555 |
| BW DIGI-METER is a registered trademark of Blue-White Industries |
| For Technical Information, including installation and parts
drawings and, engineering data, visit www.blue-white.com |
