BW DIGI-METER F-2000 SERIES
The Model FH is the base unit of the BW DIGI-METER series. The Model FH is a paddlewheel type insertion flow sensor. It applies precise digital technology to monitor flow rates from 1.0 to 20 feet per second. The signal can travel up to one mile without a booster and, the unit will interface with many of the process meters, electronic control devices and computer systems on the market. The F-2000RT is a flow rate meter and flow totalizer. It has an eight digit, easy to read LCD display. Three front panel push buttons allow the operator to toggle between flow rate and total flow, reset the total flow to zero or, access the programming screens. Four standard AA batteries or an AC/DC plug-in wall transformer powers the unit. There are two optional, user installable, add-on circuit boards available. The Model AO converts the displayed rate to an analog 4-20 milliamp or, zero to 10 volt DC output signal. The Model PC is capable of programmable batch processing, high/low flow rate alarm functions or, controlling chemical injection proportional to flow rate. For Superior Quality, Styling and Features, Count on the DIGI-FLO Series to Deliver!
Applications for BW DIGI-METER Series Meters include:

The Model RT:
• Measures & Displays Rate of Flow
• Measures & Displays Total Flow
The Model AO:
• Measure and Display Rate of Flow
• Measure and Display Total Flow
• Control External Devices with 4-20mA Control Signal
• Control External Devices with 0 – 10 VDC Control Signal
The Model PC:
• Measure and Display Rate of Flow
• Measure and Display Total Flow
• Maintain a Flow Rate Range Alarm
• Trigger a High flow Rate Alarm
• Trigger a Low Flow Rate Alarm
• Manually Controlled Batch processing
• Timed Auto Reset Batch Processing
• Proportional Flow Chemical Pump Process Control

BW DIGI-METER F-1000 SERIES
Blue-White's F-1000 Series meters provide the performance and features of electronic meters, without the need for an electrical hook-up.
Three versions of this top quality digital meter are offered:
BW DIGI-METER F-1000RB: Battery Powered RATE Meter
BW DIGI-METER F-1000TB: Battery Powered FLOW TOTALIZER
BW DIGI-METER F-1000RT:Battery Powered RATE Meter and FLOW TOTALIZER

BENEFITS INCLUDE:
• Factory Calibrated, No operator programming required!
• 6 digit LCD, up to 4 decimal positions
• Display & update time: every 2 seconds
• Battery operated (2 batteries alkaline AAA)
• Suitable for outdoor installations
• Total reset function can be disabled
• Tamper proof
• Installs Quickly on Existing Pipe
• Available pipe sizes 1-1/2" through 12"
• No Pressure Drop
• Minimal Maintenance Required

More Features for BW DIGI-METER F-1000 and F-2000 Series Include:
• Molded Polypropylene* and PVDF** molded
• inline fittings.
• Molded pipe sizes include: 3/8", 1/2", 3/4", 1", 1-1/2", and 2"
• New sizes include 1-1/2" and 2"
• Now all sizes are available in natural PVDF.
* Molded Polypropylene is yellow.
** Molded natural PVDF is white (natural).

316 STAINLESS STEEL TEE FITTINGS FOR PADDLEWHEEL METERS

PIPE SIZES:
• 1" Female pipe threads (IPS)
• 1-1/2" Female pipe threads (IPS)
• 2" Female pipe threads (IPS)
FITTING MATERIAL:
• 316 Stainless Steel
MAXIMUM FLUID TEMPERATURE:
• 200°F / 93°C  at 0 PSI
MAXIMUM WORKING PRESSURE:
• 300 psig / 20 Bar at 70°F / 21°C
ACCURACY (FULL SCALE):
• F-1000 = +/- 2%  Full scale
• F-2000 = +/- 1%  Full scale
• Sensor = +/- 1%  Full scale

BW DIGI-METER SENSOR ONLY

• Pipe sizes: 3/8" to 12"
• No Display
• 25 feet of signal cable
• NEMA 4X rated, Outdoor use OK
• Coil sensor option
• Distance up to 200 feet (61 meters)
• Requires no external power
• AC sine wave output signal
• Coil generates AC voltage: From .06 volts to approximately 3 volts, depending
aon the flow rate
• Hall Effect sensor option
• Distance up to 1 mile (1.61 km)
• TTL/CMOS compatible digital (current sinking) output signal
• DC square wave output signal
• Power required:
• Customer supply power (6-24V DC absolute)
• 115V AC plug in transformer
• 220V AC plug in transformer
• 230V AC plug in transformer

BW DIGI-METER F-2000 SERIES
BW DIGI-METER F-2000 Series electronic insertion style flowmeters, are well suited for monitoring flow in municipal water and wastewater applications. The clamp on saddle fitting and insertion sensor is quickly installed on IPS (ASTM-D-1785) pipe sizes from 1-1/2” through 12” and metric (DIN 8062) pipe sizes from 50 mm through 315 mm. The electronic display and communication enclosure can be mounted directly to the sensor, or remotely mounted to a pipe or panel.
Standard F-2000 models display flow rate and accumulated total flow, and include an NPN open collector output for communication with data loggers, SCADA systems, and other external devices. Optional 4-20 mA / 0-10 VDC plug-in circuitry can be added for additional communication requirements. The optional batch processing plug-in circuitry includes an 8-amp relay board that adds manual or automatic batch processing capability, or a high/low flow rate alarm output.
The electronics can be battery operated using four standard AA size batteries or, AC powered using a 15-24V DC plug-in transformer. A battery back-up option is also available. Battery life, in standard mode, is a minimum of one year. A battery saving mode is available. LCD display icons indicate the current operating mode, and warn of a low battery power condition. The memory is nonvolatile, and therefore is not affected by loss of power. The F-2000 Series is field programmable, and the programming mode is easily accessed via three front panel tactile switches. The F-2000 can be factory programmed to any required units of measure. The digital display is housed in a corrosion resistant ABS enclosure and is acceptable for outdoor use.
For Superior Design, Quality and Function Insist on DIGI-FLO!